Что такое eof python
EOF — это не символ
Если вы читали о системе ввода-вывода Unix/Linux, или экспериментировали с ней, если писали программы на C, которые читают данные из файлов, то это заявление вам, вероятно, покажется совершенно очевидным. Но давайте поближе присмотримся к следующим двум утверждениям, относящимся к тому, что я нашёл в книге:
EOF — это не символ
Это может выглядеть так:
А что такое, вообще, символ? Символ — это самый маленький компонент текста. «A», «a», «B», «b» — всё это — разные символы. У символа есть числовой код, который в стандарте Unicode называют кодовой точкой. Например — латинская буква «A» имеет, в десятичном представлении, код 65. Это можно быстро проверить, воспользовавшись командной строкой интерпретатора Python:
Или можно взглянуть на таблицу ASCII в Unix/Linux:
Скомпилируем и запустим программу:
В конце файлов нет некоего особого символа
Может, EOF — это особенный символ, который можно обнаружить в конце файла? Полагаю, сейчас вы уже знаете ответ. Но давайте тщательно проверим наше предположение.
Возьмём простой текстовый файл, helloworld.txt, и выведем его содержимое в шестнадцатеричном представлении. Для этого можно воспользоваться командой xxd :
Что такое EOF?
EOF (end-of-file) — это состояние, которое может быть обнаружено приложением в ситуации, когда операция чтения файла доходит до его конца.
ANSI C
Начнём с почтенного C. Представленная здесь программа является модифицированной версией cat из книги «Язык программирования C».
Вот некоторые пояснения, касающиеся вышеприведённого кода:
Python 3
Запустим программу и взглянём на возвращаемые ей результаты:
Вот более короткая версия этого же примера, написанная на Python 3.8+. Здесь используется оператор := (его называют «оператор walrus» или «моржовый оператор»):
В Go можно явным образом проверить ошибку, возвращённую Read(), на предмет того, не указывает ли она на то, что мы добрались до конца файла:
JavaScript (Node.js)
Низкоуровневые системные механизмы
Вот эта программа, написанная на C:
Вот та же программа, написанная на Python 3:
Вот — то же самое, написанное на Python 3.8+:
Запустим и этот код:
Итоги
EOF — это не символ
Если вы читали о системе ввода-вывода Unix/Linux, или экспериментировали с ней, если писали программы на C, которые читают данные из файлов, то это заявление вам, вероятно, покажется совершенно очевидным. Но давайте поближе присмотримся к следующим двум утверждениям, относящимся к тому, что я нашёл в книге:
EOF — это не символ
Это может выглядеть так:
А что такое, вообще, символ? Символ — это самый маленький компонент текста. «A», «a», «B», «b» — всё это — разные символы. У символа есть числовой код, который в стандарте Unicode называют кодовой точкой. Например — латинская буква «A» имеет, в десятичном представлении, код 65. Это можно быстро проверить, воспользовавшись командной строкой интерпретатора Python:
Или можно взглянуть на таблицу ASCII в Unix/Linux:
Скомпилируем и запустим программу:
В конце файлов нет некоего особого символа
Может, EOF — это особенный символ, который можно обнаружить в конце файла? Полагаю, сейчас вы уже знаете ответ. Но давайте тщательно проверим наше предположение.
Возьмём простой текстовый файл, helloworld.txt, и выведем его содержимое в шестнадцатеричном представлении. Для этого можно воспользоваться командой xxd :
Что такое EOF?
EOF (end-of-file) — это состояние, которое может быть обнаружено приложением в ситуации, когда операция чтения файла доходит до его конца.
ANSI C
Начнём с почтенного C. Представленная здесь программа является модифицированной версией cat из книги «Язык программирования C».
Вот некоторые пояснения, касающиеся вышеприведённого кода:
Python 3
Запустим программу и взглянём на возвращаемые ей результаты:
Вот более короткая версия этого же примера, написанная на Python 3.8+. Здесь используется оператор := (его называют «оператор walrus» или «моржовый оператор»):
В Go можно явным образом проверить ошибку, возвращённую Read(), на предмет того, не указывает ли она на то, что мы добрались до конца файла:
JavaScript (Node.js)
Низкоуровневые системные механизмы
Вот эта программа, написанная на C:
Вот та же программа, написанная на Python 3:
Вот — то же самое, написанное на Python 3.8+:
Запустим и этот код:
Итоги
Python binary EOF
I want to read through a binary file. Googling «python binary eof» led me here.
4 Answers 4
Read at most size bytes from the file (less if the read hits EOF before obtaining size bytes). If the size argument is negative or omitted, read all data until EOF is reached. The bytes are returned as a string object. An empty string is returned when EOF is encountered immediately. (For certain files, like ttys, it makes sense to continue reading after an EOF is hit.) Note that this method may call the underlying C function fread() more than once in an effort to acquire as close to size bytes as possible. Also note that when in non-blocking mode, less data than was requested may be returned, even if no size parameter was given.
If you want to read your file one byte at a time, you will have to read(1) in a loop and test for «emptiness» of the result:
If you want to read your file by «chunk» of say 50 bytes at a time, you will have to read(50) in a loop:
In fact, you may even break one iteration sooner:
Concerning the other part of your question:
Why does the container [..] contain [..] a whole bunch of them [bytes]?
A file object is its own iterator, [..]. When a file is used as an iterator, typically in a for loop (for example, for line in f: print line.strip()), the next() method is called repeatedly. This method returns the next input line, or raises StopIteration when EOF is hit when the file is open for reading (behavior is undefined when the file is open for writing).
The the code above read a binary file line-by-line. That is stopping at each occurrence of the EOL char ( \n ). Usually, that leads to chunks of various length as most binary files contains occurrences of that char randomly distributed.
Python Unexpected EOF While Parsing: The Way To Fix It
Have you seen the syntax error “unexpected EOF while parsing” when you run a Python program? Are you looking for a fix? You are in the right place.
The error “unexpected EOF while parsing” occurs when the interpreter reaches the end of a Python file before every code block is complete. This can happen, for example, if any of the following is not present: the body of a loop (for / while), the code inside an if else statement, the body of a function.
We will go through few examples that show when the “unexpected EOF while parsing” error occurs and what code you have to add to fix it.
How Do You Fix the EOF While Parsing Error in Python?
If the unexpected EOF error occurs when running a Python program, this is usually a sign that some code is missing.
This is a syntax error that shows that a specific Python statement doesn’t follow the syntax expected by the Python interpreter.
For example, when you use a for loop you have to specify one or more lines of code inside the loop.
The same applies to an if statement or to a Python function.
To fix the EOF while parsing error in Python you have to identify the construct that is not following the correct syntax and add any missing lines to make the syntax correct.
The exception raised by the Python interpreter will give you an idea about the line of code where the error has been encountered.
Once you know the line of code you can identify the potential code missing and add it in the right place (remember that in Python indentation is also important).
SyntaxError: Unexpected EOF While Parsing with a For Loop
Let’s see the syntax error that occurs when you write a for loop to go through the elements of a list but you don’t complete the body of the loop.
In a Python file called eof_for.py define the following list:
Then write the line below:
This is what happens when you execute this code…
A SyntaxError is raised by the Python interpreter.
The exception “ SyntaxError: unexpected EOF while parsing” is raised by the Python interpreter when using a for loop if the body of the for loop is missing.
The end of file is unexpected because the interpreter expects to find the body of the for loop before encountering the end of the Python code.
To get rid of the unexpected EOF while parsing error you have to add a body to the for loop. For example a single line that prints the elements of the list:
Update the Python program, execute it and confirm that the error doesn’t appear anymore.
Unexpected EOF While Parsing When Using an If Statement
Let’s start with the following Python list:
Then write the first line of a if statement that verifies if the size of the animals list is great than 2:
At this point we don’t add any other line to our code and we try to run this code.
We get back the error “unexpected EOF while parsing”.
The Python interpreter raises the unexpected EOF while parsing exception when using an if statement if the code inside the if condition is not present.
When you run this code you get the following output.
This time the error is at line 6 that is the line immediately after the else statement.
The Python interpreter doesn’t like the fact that the Python file ends before the else block is complete.
That’s why to fix this error we add another print statement inside the else statement.
The error doesn’t appear anymore and the execution of the Python program is correct.
Note: we are adding the print statements just as examples. You could add any lines you want inside the if and else statements to complete the expected structure for the if else statement.
Unexpected EOF While Parsing With Python Function
The error “unexpected EOF while parsing” occurs with Python functions when the body of the function is not provided.
To replicate this error write only the first line of a Python function called calculate_sum(). The function takes two parameters, x and y.
At this point this is the only line of code in our program. Execute the program…
The EOF error again!
Let’s say we haven’t decided yet what the implementation of the function will be. Then we can simply specify the Python pass statement.
Execute the program, confirm that there is no output and that the Python interpreter doesn’t raise the exception anymore.
Unexpected EOF While Parsing With Python While Loop
The exception “unexpected EOF while parsing” can occur with several types of Python loops: for loops but also while loops.
On the first line of your program define an integer called index with value 10.
Then write a while condition that gets executed as long as index is bigger than zero.
There is something missing in our code…
…we haven’t specified any logic inside the while loop.
When you execute the code the Python interpreter raises an EOF SyntaxError because the while loop is missing its body.
Add two lines to the while loop. The two lines print the value of the index and then decrease the index by 1.
The output is correct and the EOF error has disappeared.
Unexpected EOF While Parsing Due to Missing Brackets
The error “unexpected EOF while parsing” can also occur when you miss brackets in a given line of code.
For example, let’s write a print statement:
As you can see I have forgotten the closing bracket at the end of the line.
Let’s see how the Python interpreter handles that…
It raises the SyntaxError that we have already seen multiple times in this tutorial.
Add the closing bracket at the end of the print statement and confirm that the code works as expected.
Unexpected EOF When Calling a Function With Incorrect Syntax
Now we will see what happens when we define a function correctly but we miss a bracket in the function call.
The definition of the function is correct but the function call was supposed to be like below:
Instead we have missed the closing bracket of the function call and here is the result.
Add the closing bracket to the function call and confirm that the EOF error disappears.
Unexpected EOF While Parsing With Try Except
A scenario in which the unexpected EOF while parsing error can occur is when you use a try statement and you forget to add the except or finally statement.
Let’s call a function inside a try block without adding an except block and see what happens…
When you execute this code the Python interpreter finds the end of the file before the end of the exception handling block (considering that except is missing).
The Python interpreter finds the error on line 7 that is the line immediately after the last one.
That’s because it expects to find a statement that completes the try block and instead it finds the end of the file.
To fix this error you can add an except or finally block.
When you run this code you get the exception message because we haven’t passed an argument to the function. The print_message() function requires one argument to be passed.
Modify the function call as shown below and confirm that the code runs correctly:
Conclusion
After going through this tutorial you have all you need to understand why the “unexpected EOF while parsing” error occurs in Python.
You have also learned how to find at which line the error occurs and what you have to do to fix it.
Python EOF error when reading input
When I execute this Python code I am getting «EOF error when reading input».
Can you please help? I am running Python 2.7.5
4 Answers 4
I can’t seem to reproduce this error although using the same input as you did. Maybe you have a newline character before the input you have specified?
Try running this code using python prog.py in your terminal.
EOF error is expected if no data is given when calling input or raw_input as explained in the documentation.
In Python 2, raw_input() returns a string, and input() tries to run the input as a Python expression. So, changing your first line to something like this should work.
According to the official documentation
This function does not catch user errors. If the input is not syntactically valid, a SyntaxError will be raised. Other exceptions may be raised if there is an error during evaluation.
does n+1 number of iterations, yet your input file:
Only has n number of lines remaining when that loop is about to start. Upon attempting to read a n+1 th line, you’ll get an EOFError as there are no more lines.
I was really confused by this problem as well, and I couldn’t find the direct answer on other resources.
I had to change these configurations by unchecking the «emulate terminal in output console» box in the picture below and then it worked perfectly.