Что такое taskbar system

Windows 7 Taskbar – что нового и как его включить в Windows 7 build 6801.

Самая интересная фишка Windows 7 на данный момент!
С новым taskbar Windows 7 выглядит очень симпатично:

Каждое приложение, помещаемое в данную панель, отображается в виде иконки:

Теперь все запущенные окна данного приложения показываются при наведении курсора на данную иконку:

Каждое окно приложения можно закрыть прямо из таскбара:

На панели видно сколько открыто окон или вкладок у приложения:

Если приложение открыто и его окно активно, то у иконки более тёмный фон. Если открыто, но не активно, то более светлый фон:

При наведении курсора на иконку, ее фон подсвечивается:

Данная “подсветка” передвигается вслед за курсором. К тому же иконка подсвечивается тем цветом, которого больше всего на иконке:

Когда в каком-то приложении (пока что таких приложений мало) присутствует progress bar, по иконке в taskbar’е бегает зеленая полоска

Любое приложение можно добавить на таскбар и/или удалить с него:

Некоторыми приложениями можно управлять, не открывая окна приложения:

В меню настроек можно сделать отображение маленьких иконок и отключить группировку:

Ну и напоследок бонус тем, кто хочет увидить данную фишку своими глазами и уже установил/готов установить себе Windows 7 build 6801:
Как только вы установите Windows 7 Pre-Beta, никакого нового таскбара вы не увидите. Неизвестно по какой причине, но он не включен по-умолчанию. Но в самой системе он есть, что и заметил один хороший человек по имени Rafael. За что ему огромное спасибо! А вот как можно включить новый таскбар:
Скачиваем специальную утилиту в версии x86 или x64, копируем ее в папку Windows. Затем открываем блокнот, вставляем в него:

Вот и всё, новая панель появилась 🙂 Радуемся, тестируем и снова радуемся 🙂
Спасибо. Надеюсь, что данный пост был вам интересен 😉

Источник

Как настроить панель задач с помощью TaskbarX

Панель задач Windows — это основа операционной системы. Вы можете загрузить в него свои любимые приложения для легкого доступа или сохранить его чистым и понятным, чтобы он выглядел в минималистском стиле. Одна вещь, которую вы не можете сделать с панелью задач Windows 10, — это переместить ее. По крайней мере, вы не можете переместить панель задач в центр экрана.

Если вам нужен центральный центр приложений, подобный macOS, вам понадобится сторонний инструмент панели задач, например TaskbarX.

Что такое панель задач Windows?

Панель задач Windows — это панель, которая проходит в нижней части экрана. На одном конце вы увидите логотип Windows 10, который является кнопкой меню «Пуск». В зависимости от конфигурации панели задач вы также можете увидеть параметры для Кортаны, голосового помощника Windows 10.

Рядом с меню «Пуск» расположены значки приложений. Это ярлыки приложений на вашем компьютере, которые вы можете добавлять или удалять.

Стандартная панель задач Windows 10 может перемещаться в четыре положения экрана: вверху, внизу, влево и вправо. Эти местоположения определяют положение панели задач. Но вы не можете перемещать расположение приложений на панели задач. Значки всегда перемещаются в место по умолчанию рядом с кнопкой меню «Пуск».

По большей части это нормально. Но если вы хотите настроить панель задач Windows 10 и переместить приложения панели задач в центр, вам понадобится сторонний инструмент настройки.

Что такое TaskbarX?

Панель задачX — это инструмент настройки панели задач с открытым исходным кодом, позволяющий управлять значками панели задач. Установив TaskbarX, вы можете переместить значки панели задач в центральную точку монитора.

Инструмент также включает в себя некоторые удобные дополнения, такие как прозрачный, размытый или акриловый стиль панели задач, анимацию для приложений и значков, а также возможность скрыть значок меню «Пуск».

Как установить TaskbarX

TaskbarX поставляется в трех разных версиях. В этом руководстве я использую опцию Portable Zip, которая включает все необходимые файлы в одном архиве. Если вы предпочитаете использовать Microsoft Store, вы можете купить Панель задачX за 1,09 доллара. Версия для Microsoft Store требует, чтобы вы потратили доллар, но взамен вы получаете более простую установку и автоматические обновления. В качестве альтернативы TaskbarX доступен как скин Rainmeter.

Сначала отправляйтесь в Домашняя страница TaskbarX и скачайте последнюю версию. Щелкните загруженный файл правой кнопкой мыши и распакуйте архив. Например, 7Zip> Распаковать в «Панель задач X».

Откройте папку TaskbarX и запустите Exe файл. Значки на панели задач автоматически переместятся в центр панели задач!

Как настроить TaskbarX

В той же папке TaskbarX находится еще один инструмент, Конфигуратор TaskbarX. Конфигуратор, как кажется: инструмент настройки для TaskbarX. Он включает в себя простые в использовании параметры для всех стилей TaskbarX. Всего пять категорий:

Стиль

Меню «Стиль» управляет уровнем прозрачности или цветом панели задач. Вы можете выбрать один из пяти вариантов. Выберите вариант, затем выберите Применять в правом нижнем углу.

Вы можете использовать ползунки для создания цвета панели задач. Или щелкните значок выбора цвета, чтобы выбрать цвет в любом месте экрана. Цвет применяется к панели задач после нажатия кнопки «Применить», но стиль изменяется с использованием других параметров, таких как «Прозрачный градиент», «Непрозрачность» и «Размытие». Эти параметры используют ваш собственный цвет в качестве основы для эффекта.

Например, на приведенном выше изображении показаны разные прозрачные градиенты, а на следующем изображении показан параметр выбора цвета в действии.

Анимация

Анимация показывает, как перемещаются значки панели задач при открытии нового приложения. На выбор предлагается более 40 различных анимаций TaskbarX, так что вам придется поиграть, чтобы найти свой любимый вариант.

Успех опции анимации также зависит от ваших параметров значка на панели задач Windows 10. Если у вас сложены значки приложений, как в моем примере изображений панели задач, вы не увидите никакой анимации, независимо от вашего выбора. Если вы выберете несколько записей на панели задач для каждого приложения или большие записи на панели задач, вы увидите изменение стиля анимации.

Должность

Меню «Положение» позволяет вам регулировать положение значков панели задач, когда они находятся в центре. Например, вы можете смещать значки, используя положительное или отрицательное количество пикселей (где отрицательное число будет смещено в сторону меню «Пуск», а положительное — в сторону панели задач).

В меню «Положение» есть еще одна удобная опция: Не центрировать панель задач. Выберите этот вариант, если вы хотите настроить панель задач со стилями, не перемещая значки в центр. Значки на панели задач вернутся в исходное положение вместе с меню «Пуск».

График задач

TaskbarX не запускается автоматически при запуске Windows 10. Чтобы решить эту проблему, перейдите в меню «График задач», введите время задержки (в секундах) и нажмите Создайте, тогда Применять.

Extra

Меню Extra содержит несколько дополнительных настроек TaskbarX, например, для настроек с несколькими мониторами. Скажем, например, вы хотите центрировать панель задач только на одном из ваших мониторов? Для этого есть вариант. Или если вы хотите скрыть область панели задач на дополнительном мониторе? TaskbarX тоже может это сделать.

Около

Я просто кратко упомяну меню «О программе».

Вы можете использовать это меню, чтобы проверить, что на TaskbarX установлена ​​последняя версия. Если нет, вы можете загрузить и начать использовать последнюю версию. Разработчик, Крис Андриссен, выпускает обновления TaskbarX, чтобы исправить ошибки и улучшить функции. Вы всегда должны проверять наличие обновлений после крупного обновления Windows 10, так как Microsoft имеет привычку ломать приложения других разработчиков (конечно, не имея в виду).

Как удалить TaskbarX

TaskbarX также легко удалить с вашего компьютера.

Откройте конфигуратор TaskbarX и выберите Остановить панель задачX. Перейдите на вкладку «Удалить» и выберите Удалить. Это все, что нужно сделать.

Настройте панель задач с помощью TaskbarX

Настройка Windows 10 не всегда проста. Попутно вы можете что-то ломать, делая части Windows 10 непригодными для использования. Однако с помощью такого инструмента, как TaskbarX, вы можете настроить панель задач, не беспокоясь об уничтожении чего-либо в процессе.

Как и во всех проектах с открытым исходным кодом, если вам нравится приложение, подумайте о том, чтобы сделать пожертвование разработчику, чтобы он поддержал проект.

Источник

Taskbar System version 1.0.0.2 Virus

Taskbar System

Taskbar System is a Trojan horse that targets Windows computers and is capable of taking over the infected system and running different harmful processes in it. Taskbar System belongs to the widespread Trojan horse virus category and can cause different types of harm to the attacked computer.

The Taskbar System version 1.0.0.2 will make your computer slow and use a lot of system recourses

Threats like Taskbar System are very common and they can be used in a big number of ways by their criminal creators. Taskbar System, in particular, is a brand new Trojan horse virus and we don’t have sufficient data to tell you the specific end-goal of this infection. However, we can still provide you with some important information about this Trojan and we can also help you remove it from your computer in case you’ve been hit by it. So, if you suspect that this malicious piece of software may have recently entered your system and is currently operating from inside it, we urge you to read all the information provided on this page so as to deal with this malware threat in the best possible way.

Taskbar System version 1.0.0.2

Despite its overall stealthiness and ability to remain unnoticed while operating, Taskbar System version 1.0.0.2 may occasionally trigger different symptoms that users may spot.

One possible indication that there could be a Trojan in the system is the occurrence of BSOD crashes. A Blue Screen of Death (BSOD) crash is when your PC suddenly shuts down and restarts but instead of loading the Windows interface, a blue error screen appears, notifying you about a serious problem in the computer. Sometimes, Trojans can cause such BSOD crashes but bear in mind that there are many other issues (both software- and hardware-related) that may be responsible for this symptom.

Other unusual disturbances in the computer such as program errors, screen freezes, changes in the system or browser settings without your permission, and sluggishness of the computer could also take place if there is a Trojan hidden inside the computer.

Again, those symptoms could be caused by other issues or even by some regular programs and processes. Nevertheless, it is important to scan your system for any hidden threats and remove anything potentially harmful that you may detect, which is why you should definitely check out our removal guide for Taskbar System if you think that this virus may have entered your computer.

The Taskbar System virus in Windows 10

There are a lot of different types of harm that the Taskbar System virus may cause to your Windows 10 OS and virtual privacy, especially if it is allowed to stay in the computer for an extended period of time.

This Trojan may spy on your online and offline activities, keep tabs on your browsing history, your conversations, the passwords and usernames you type in, as well as collect other forms of sensitive information and then use the gathered data for fraud, blackmailing, harassment, theft, and more. Trojans can also take over the whole machine and force it to use up all of its RAM, CPU, and GPU resources to generate cryptocurrency for the hackers. Also, some Trojans are even capable of neutralizing your antivirus and then loading additional malware programs such as Ransomware cryptoviruses on the already infected computer. If you don’t want any of this to happen to you and your computer, it is crucial that you act quickly and remove the virus with the help of the instructions below as soon as possible.

SUMMARY:

Remove Taskbar System Virus

To remove Taskbar System, you must first try to uninstall the program that brought the virus inside your computer by following the next steps:

These short steps should rid your PC of the malicious program that infected you with Taskbar System but it is possible that there are still remnants of the Trojan in the system that haven’t been removed. It is also possible that you weren’t able to find anything malicious-looking in the Control Panel or that the suspicious program you tried to uninstall didn’t get removed. In either case, if you still think Taskbar System is present in your computer, we suggest you proceed with the more advanced steps shown below and complete them in the order they are shown.

In this step, your task will be to find any processes in your computer’s Task Manager that may be linked to the virus. You can do that by pressing the Ctrl + Shift + Esc keys from the keyboard and opening the Processes tab where you will see all processes that are running in your system at the moment.

Trojans like to hide their processes by giving them normal-looking names so do not expect there to be a process named Taskbar System in there. Use your personal judgement to try to determine which one is the malicious process. Possible red flags to look out for are unusually high use of CPU or RAM coming from a process with a name that’s unfamiliar to you or a process that doesn’t seem connected to any of the programs that you currently have open on the computer.

If a specific process catches your attention and looks suspicious, type its name in Google or another reputable search engine and see what results come up. If the results tell you that the process isn’t a process from a regular program that you have or a legitimate system process, then it is likely that it isn’t supposed to be running in your system.

If that is the case, select the suspected process with the right-click of your mouse and select the Open File Location option to reveal the files of that process.

The files in the file location folder must be scanned for malware so use the anti-malware scanner below to test the files.

If one or more of the tested files are flagged as hazardous, you must quit the process they are related to by selecting it in the Task Manager and clicking on End Process.

Then return to the location folder and try to delete the folder itself. If an error message comes up, go back inside the folder, delete whatever files you can that are stored there and if there are files that you aren’t allowed to delete, leave them as they are for now. Later, when you are done with the rest of the guide, you must return here to try to delete the file location folder alongside what files are left in it.

WARNING! READ CAREFULLY BEFORE PROCEEDING!

More information on SpyHunter, steps to uninstall, EULA, Threat Assessment Criteria, and Privacy Policy.

Go into Safe Mode to make sure that even if you have missed any malicious processes in the previous step, those won’t interrupt the rest of the Taskbar System removal process. Follow the link shown above if you don’t know how to enter Safe Mode and need assistance with it.

More information on SpyHunter, steps to uninstall, EULA, Threat Assessment Criteria, and Privacy Policy.

After Safe Mode is enabled, you must clean the Startup items of your PC from anything unwanted that may currently be enabled. To do this, press Winkey + R, type msconfig, and press Enter.

In the following window, go to Startup and examine the items from the shown list. If any of them look like they could be from Taskbar System or if any of them are unfamiliar and you think might be unwanted, remove the ticks from their checkboxes and click on Apply. Do the same with items that have unknown creators (manufacturers) unless the item is from a program you are familiar with and know you can trust.

Once all suspicious entries from the Startup tab have been unchecked, exit the System Configuration window by clicking OK to save changes.

Paste the following line in the search field of the Start Menu and click on the file that shows first in the results: notepad %windir%/system32/Drivers/etc/hosts.

A notepad file called Hosts will appear on your screen – this is a file that gets often targeted by Trojans, Spyware, Browser Hijackers, and other forms of malware and if yours has been hacked by Taskbar System, you must fix it. The way to find out if your Hosts file has been manipulated by malware is by looking at the bottom of the text, where it says Localhost.

If there are any lines of text (usually weird IP addresses) below the Localhost line, this means that a third-party program (likely a malware) has meddled with the file. However, to confirm that the IP addresses below Localhost in your Hosts file are from the virus, we’d need to take a look at them first so we suggest copying them and placing them down in the comments.

If we confirm that the IP addresses in your Hosts file are from the virus, we will tell you that in our reply to your comment and you will have to delete those IPs from the file and then save the changes you have made to it.

Warning!: This last step from the guide will require deleting certain entries related to Taskbar System from the Registry of your computer. Since the Registry holds lots of sensitive settings related to the OS of your computer, it is important to be very careful when making changes to it. Only delete something from the Registry if you are certain that it is related to Taskbar System. In case of doubt, request our assistance through the comments section and only proceed with the deletion if we confirm that the item(s) in question must be deleted.

To start the Registry Editor, open the Start Menu, type regedit in its search box, and click on the first item that shows up (should be regedit.exe). Windows will usually ask you to confirm that you want to open the Editor and allow it to make changes in the system so click on Yes to continue.

When the Registry Editor shows up on your screen, select the Edit menu and click on the Find option. In the Find search box, type the virus name and then click on Find Next. If a result is found with the name of the virus, click on it with the right-button of your mouse and then select Delete and confirm the deletion.

Repeat the search by clicking on Find Next again and delete the next found result – keep doing this until no more results show up when you search for the Trojan’s name.

Next, expand the folders to the left until you get to the following three locations in the Registry:

In those locations, look for folders with odd-looking names. For example, folders that have names that are much longer than the rest and consist of letters and/or numbers that seem to be arranged in a random order. If any such folder grabs your attention, delete it. If you are unsure about what to delete and what not to delete, remember to ask us in the comments.

About the author

Brandon Skies

Brandon is a researcher and content creator in the fields of cyber-security and virtual privacy. Years of experience enable him to provide readers with important information and adequate solutions for the latest software and malware problems.

Источник

The Taskbar

The Windows interface includes a special application desktop toolbar called the taskbar. You can use the taskbar for such tasks as switching between open windows and starting new applications.

For information on changes made to the taskbar as of WindowsВ 7, see Taskbar Extensions.

This topic contains the following sections.

About the Taskbar

The taskbar includes the following:

The Start menu contains commands that can access programs, documents, and settings. These commands include All Programs, Documents, Control Panel, Games, Help and Support, Shut down, and Search programs and files.

The Start in earlier versions of Windows contained items such as Find and Run, the functionality of which was included in Search programs and files in WindowsВ Vista and later.

The Quick Launch bar, available in versions of Windows earlier than WindowsВ 7, contains shortcuts to applications. Windows provides default entries, such as Windows Internet Explorer, and the user can add any further shortcuts that they choose. Icons in this area respond to a single click. In WindowsВ 7 and later, this functionality is included in the taskbar buttons.

The Shell places a button on the taskbar whenever an application creates an unowned window—that is, a window that does not have a parent and that has the appropriate extended style bits (see Managing Taskbar Buttons, below). To switch to a window, the user clicks its window button. This functionality has been greatly expanded as of Windows 7. For more information, see Taskbar Extensions.

Applications can put icons in the notification area to indicate the status of an operation or to notify the user about an event. For example, an application might put a printer icon in the notification area to show that a print job is under way. However, in WindowsВ 7 and later, some of the information previously provided by the notification area should be provided through an application’s taskbar button. The notification area is located at the right edge of the taskbar (if the taskbar is horizontal) or at the bottom (if the taskbar is vertical). For more information, see Notifications and the Notification Area.

The notification area also displays the current time if that option is selected. The option is found as:

The user can right-click the taskbar to display the shortcut menu. The shortcut menu includes commands to cascade windows, stack windows, show windows side-by-side, show the desktop, start Task Manager, and set taskbar properties. The shortcut menu also provides the option to add or remove a set of toolbars from the taskbar. You can add new toolbars to this menu by registering them under the CATID_DeskBand category. For more information, see Implementing Band Objects. Note that as of WindowsВ 7, the taskbar and the notification area have separate shortcut menus. These shortcut menus share some options, such as window arrangement, and add others.

Taskbar Display Options

The taskbar supports two display options: Auto-Hide and, in WindowsВ Vista and earlier only, Always On Top (the taskbar is always in this mode in WindowsВ 7 and later). To set these options, the user must open the taskbar shortcut menu, click Properties, and select or clear the Auto-hide the taskbar check box or the Keep the taskbar on top of other windows check box. To retrieve the state of these display options, use the ABM_GETSTATE message. If you would like to be notified when the state of these display options changes, process the ABN_STATECHANGE notification message in your window procedure. To change the state of these display options, use the ABM_SETSTATE message.

The work area is the portion of the screen not obscured by the taskbar. To retrieve the size of the work area, call the SystemParametersInfo function with the SPI_GETWORKAREA value set. To retrieve the rectangle coordinates that describe the location of the taskbar, use the ABM_GETTASKBARPOS message.

It is possible to cover the taskbar by explicitly setting the size of the window rectangle equal to the size of the screen with SetWindowPos. For WindowsВ 2000 systems or later, the window must lack either WS_CAPTION or WS_THICKFRAME, or else the window must be sized so that the client area covers the entire screen. Also particular to those systems, if the taskbar is set to Always On Top, it will remain hidden only while the application is the foreground application.

Adding Shortcuts to the Start Menu

To add an item to the Programs submenu on Microsoft WindowsВ NTВ 4.0, WindowsВ 2000 and later, or WindowsВ 95 or later, follow these steps.

Managing Taskbar Buttons

The Shell creates a button on the taskbar whenever an application creates a window that isn’t owned. To ensure that the window button is placed on the taskbar, create an unowned window with the WS_EX_APPWINDOW extended style. To prevent the window button from being placed on the taskbar, create the unowned window with the WS_EX_TOOLWINDOW extended style. As an alternative, you can create a hidden window and make this hidden window the owner of your visible window.

The Shell will remove a window’s button from the taskbar only if the window’s style supports visible taskbar buttons. If you want to dynamically change a window’s style to one that does not support visible taskbar buttons, you must hide the window first (by calling ShowWindow with SW_HIDE), change the window style, and then show the window.

The window button typically contains the application icon and title. However, if the application does not contain a system menu, the window button is created without the icon.

If you want your application to get the user’s attention when the window is not active, use the FlashWindow function to let the user know that a message is waiting. This function flashes the window button. Once the user clicks the window button to activate the window, your application can display the message.

Modifying the Contents of the Taskbar

Version 4.71 and later of Shell32.dll adds the capability to modify the contents of the taskbar. From an application, you can now add, remove, and activate taskbar buttons. Activating the item does not activate the window; it shows the item as pressed on the taskbar.

The taskbar modification capabilities are implemented in a Component Object Model (COM) object (CLSID_TaskbarList ) that exposes the ITaskbarList interface (IID_ITaskbarList). You must call the ITaskbarList::HrInit method to initialize the object. You can then use the methods of the ITaskbarList interface to modify the contents of the taskbar.

Adding, Modifying, and Deleting Icons in the Notification Area

Use the Shell_NotifyIcon function to add, modify, or delete icons from the notification area. The dwMessage parameter of Shell_NotifyIcon is a message to the taskbar that specifies the action to be taken. The pnid parameter is a pointer to a NOTIFYICONDATA structure that is used to identify the icon and pass any additional information that is needed for the system to process the message.

You can perform the following actions with notification area icons.

When you have completed a user interface operation, return focus to the notification area by calling Shell_NotifyIcon with dwMessage set to NIM_SETFOCUS. For example, you could do this when a taskbar icon displays a shortcut menu, but the user cancels it by pressing the ESCAPE key.

Receiving Notification Area Callback Messages

Applications commonly put icons in the notification area of the taskbar to serve as status indicators. You can provide additional information when the user performs mouse actions, such as moving the mouse pointer over the icon or clicking the icon.

The system notifies you of mouse and keyboard events by sending an application-defined callback message that is associated with a particular icon. In this way, the system can notify an application when the user, for instance, clicks the icon or selects it by pressing a key.

You define an icon’s callback message when you add the icon to the taskbar. The callback message identifier is specified in the uCallbackMessage member of the NOTIFYICONDATA structure passed with NIM_ADD. When an event occurs, the system sends the callback message to the window procedure of the window specified by the hWnd member. The wParam parameter of the message contains the identifier of the taskbar icon in which the event occurred. The lParam parameter holds the mouse or keyboard message associated with the event. For example, when the mouse pointer moves onto a taskbar icon, lParam contains WM_MOUSEMOVE.

The results of various mouse events can be summarized as follows:

Typically, clicking the icon causes the application to display a window with additional information, right-clicking displays a shortcut menu, and double-clicking executes the default shortcut menu command.

For an example of how to change the tooltip text associated with a notification area icon, see Balloon Tooltips for Status Bar Icons.

Versions 5.0 and later of the Shell handle Shell_NotifyIcon mouse and keyboard events in different ways than earlier Shell versions found on Windows NT 4.0, Windows 95, and Windows 98. The differences are as follows:

You can select which way the Shell should behave by calling Shell_NotifyIcon with dwMessage set to NIM_SETVERSION. Set the uVersion member of the NOTIFYICONDATA structure to indicate whether you want version 5.0 or pre-version 5.0 behavior.

Taskbar Creation Notification

With Microsoft Internet ExplorerВ 4.0 and later, the Shell notifies applications that the taskbar has been created. When the taskbar is created, it registers a message with the TaskbarCreated string and then broadcasts this message to all top-level windows. When your taskbar application receives this message, it should assume that any taskbar icons it added have been removed and add them again. This feature generally applies only to services that are already running when the Shell launches. The following example shows a very simplified method for handling this case.

On Windows 10, the taskbar also broadcasts this message when the DPI of the primary display changes.

Using the Taskbar

This section includes examples that demonstrate how to add icons to the taskbar notification area and how to process callback messages for taskbar icons.

Adding and Deleting Taskbar Icons in the Notification Area

You add an icon to the taskbar notification area by filling in a NOTIFYICONDATA structure and then passing the structure to Shell_NotifyIcon with dwMessage set to NIM_ADD. The structure members must specify the handle to the window that is adding the icon, as well as the icon identifier and icon handle. You can also specify tooltip text for the icon. If you need to receive mouse messages for the icon, specify the identifier of the callback message that the system should use to send the message to the window procedure.

The function in the following example demonstrates how to add an icon to the taskbar.

To delete an icon from the taskbar notification area, fill a NOTIFYICONDATA structure and call Shell_NotifyIcon with dwMessage set to NIM_DELETE. When deleting a taskbar icon, specify only the cbSize, hWnd, and uID members of the structure. For example:

Receiving Mouse Events

If you specify a callback message for a taskbar icon, the system sends the message to your application whenever a mouse event occurs in the icon’s bounding rectangle. The wParam parameter of the message specifies the identifier of the taskbar icon, and the lParam parameter of the message specifies the message that the system generated as a result of the mouse event.

The function in the following example is from an application that adds both battery and printer icons to the taskbar. The application calls the function when it receives a callback message. The function determines whether the user has clicked one of the icons and, if a click has occurred, calls an application-defined function to display status information.

Источник

• ← Что такое task менеджер
• Что такое taskeng exe →